HaiAnh Nguyen kinetic object · 2026
← all projects

completed / November 2026

Hands Dome

A motorized dome of tiny moving hands, built to hold my rings. Occasionally.

made with
CAD, 3D printing, gears, motor control
mechanism
one motor, many linked rotations
job
kinetic sculpture / ring holder (?)
the finished objectone motor doing entirely too much

the idea

A very complicated way to hold a ring.

All the hands move together, but there is only one motor. Under the dome, it turns a center drive gear whose teeth pass rotation across the whole pattern.

The dome holds every shaft at a different angle, so a set of simple rotations becomes one strange flowing motion. This sounded reasonable before I had to make it.

project film55 seconds · with narration

project progress

From one hand to far too many.

Hands Dome digital design process
01 / shape

Design the dome

I needed tilted shafts, room for the hands to pass one another, and a structure that could keep the whole gear pattern aligned. Normal jewelry storage was apparently not dramatic enough.

Hands Dome gears being assembled
02 / mechanism

Link every hand

The center gear pushes its neighbors, and every meshing pair turns in the opposite direction. Each hand stays connected to its gear while the gear rotates freely on its support.

Hands Dome motor and controller
03 / reality

The hands were heavy

Adding the hands also added load. My first motor struggled, so I upgraded it and revised the connections. The speed controller lets me choose between graceful sculpture and tiny-hand emergency.

Completed Hands Dome kinetic sculpture
04 / final

Put everything back together

One rotating input became an entire moving sculpture. It is pretty, weird, and functional—with the question mark doing important structural work.