
Make an eye movable
I designed the mechanism, printed the pieces, and tested the fit. The goal was coordinated eye movement; the first result was mostly coordinated confusion.
completed / November 2026
Three moving eyes, one red wall piece, and a back side that contains every wire I have ever known.
the build
I started with the mechanism: model the parts, print them, prototype the electronics, and make one eye move without looking like it was experiencing a medical emergency.
Then I made three, mounted them into a large panel, connected the boards and wires, added reflective pieces and decoration, and covered the front in red velvet. The back remains honest about what happened.
project progress

I designed the mechanism, printed the pieces, and tested the fit. The goal was coordinated eye movement; the first result was mostly coordinated confusion.

Breadboard tests, drilling, sanding, painting the iris, glue, eyelids, and finally the first movement. A single eye was encouraging, so naturally I tripled the problem.

I prepared and cut the large panel, mounted each mechanism from the back, and checked that the eyes could still move after becoming part of a much larger object.

The boards, servos, power, and connections all live behind the panel. The front is art. The back is a group project between wires.

I finished the surface with red fabric, black branching forms, reflective pieces, and the three moving eyes. Now it looks intentional, which is one of engineering’s greatest special effects.